This guide follows the US Qrevo Edge manual for robot QX0VIM and Empty Wash Fill Dock EWFD30LRR. Check both labels. The dock in this manual is rated 120 V, 60 Hz; the document does not establish a UK or Canadian counterpart.
Robot schedule
Clean the main brushes every two weeks and replace them every 6–12 months. Clean the side brush monthly and replace it every 3–6 months. Clean the washable filter every two weeks and replace it every 6–12 months. Mop cloths are cleaned as needed and have a 1–3-month replacement example. Actual wear can require earlier replacement.
The manual gives no fixed interval for the dirty-water tank, wheels, sensors, contacts, disposable dust bag, or cleaning-tray module; clean or replace those as needed. It does not turn these entries into a calendar schedule.
Washable filter and brush handling
Remove the washable filter before rinsing the dustbin. Use clean water only, and do not use cleaning liquid. The filter surface must not be rubbed with fingers, brushes, or hard objects. Let the dustbin and filter dry for at least 24 hours before putting them back.
For main-brush care, turn the robot over and remove the cover using its two latches. Clear hair from the brushes, ends, and bearings. Reinstall the bearings and brushes in the matching color and arrow orientation, then seat all four cover teeth until the cover clicks. Do not force a wheel or bracket; the omnidirectional-wheel bracket is not removable. Its wheel and axle may be rinsed and air-dried.
Use a soft dry cloth for the main wheels, sensors, and charging contacts. The dock’s dirty-water tank uses cold water only. The manual describes battery removal for disposal; it is not a battery-replacement procedure and prohibits battery or dock dismantling, repair, and modification.
For the different Qrevo CurvX FCC schedule, see the CurvX guide. For general filter and dock steps, see filter care and dock care.