These instructions combine four ECOVACS US support FAQs listed for DEEBOT X5 PRO OMNI. Confirm the exact model and consult the current pages when an illustration determines part orientation. The FAQs do not provide a universal care frequency.
Station tanks
The waste-water tank and clean-water tank use different steps. Remove the waste-water tank, open it, and empty it. Use the cleaning tool on residue at the bottom if needed. For the clean-water tank, remove its filter assembly, clean it, and reinstall it. The FAQ does not specify a cleaning liquid or interval and does not authorize opening internal water lines or pump parts.
Main and side brushes
Power off the DEEBOT before turning it over. To clean the main brush, remove the cover and assembly, clear hair and entanglement from the brush and its end accessories, then reinstall it. Rotate the installed brush to confirm it moves smoothly before refitting the cover. Do not open the brush motor.
For the side brush, power off and position the robot as shown in the official FAQ. Pull the brush upward, clean its bearing and remove entangled debris, then push it into the mounting slot until it clicks. If its orientation or access point does not match the page, stop and verify the exact unit.
Dust bin and primary filter
Remove the top cover and bin, open the bin lock, and empty it. Remove the filter assembly and clean dust from both sides of the primary filter; tap the assembly lightly. The FAQ permits washing the dust bin with water and says to dry it in a ventilated area before use. It does not explicitly instruct rinsing the primary filter, so this guide does not add that step or invent a drying duration.
The four pages describe only their stated removable-part procedures. They do not establish schedules, other X5-family procedures, or internal repair. For the distinct DEEBOT X5 Hybrid robot and stick vacuum, use the X5 Hybrid guide; for general filter limits, see filter and airflow care.